Monitor Constants; Using The Analog Monitor Constants - YASKAWA Varispeed F7 Instruction Manual

Monitor Constants

This section explains the analog monitor and pulse monitor constants.

Using the Analog Monitor Constants

This section explains the analog monitor constants.
Related Constants
Con-
stant
Number
Monitor
H4-01 selection (ter-
minal FM)
Gain (termi-
H4-02
nal FM)
Bias (termi-
H4-03
nal FM)
Monitor
H4-04 selection (ter-
minal AM)
Gain (termi-
H4-05
nal AM)
-90
6
Name Description
Sets the number of the monitor
item to be output (U1-
from terminal FM. The monitor
items that can be set depends on
the control method.
4, 10 to 14, 25, 28 to 31, 34, 35,
39 to 43 cannot be set.
Sets the multi-function analog
output 1 voltage level gain.
Sets whether the monitor item
output will be output in multi-
ples of 10 V.
The maximum output from the
terminal is 10 V.
A meter calibration function is
available.
Sets the multi-function analog
output 1 voltage level bias.
Sets output characteristic up/
down parallel movement as a
percentage of 10 V.
The maximum output from the
terminal is 10 V.
A meter calibration function is
available.
Sets the number of the monitor
item to be output (U1-
from terminal AM.
The monitor items that can be
set depends on the control
method.
4, 10 to 14, 25, 28 to 31, 34, 35,
39 to 43 cannot be set.
Set the voltage level gain for
multi-function analog output 2.
Set the number of multiples of
10 V to be output as the 100%
output for the monitor items.
The maximum output from the
terminal is 10 V.
A meter calibration function is
available.
Change
Setting Factory during
Range Setting Opera-
tion
)
1 to 99 2 No
0.00 to
1.00 Yes
2.50
-10.0 to
0.0% Yes
+10.0
)
1 to 99 3 No
0.00 to
0.50 Yes
2.50
Control Methods
MEMO
Open
BUS
V/f Flux
Loop
Regis-
V/f with Vec-
Vec-
ter
PG tor
tor
A A A A 41DH
Q Q Q Q 41EH
A A A A 41FH
A A A A 420H
Q Q Q Q 421H