Program; Display Dim; Disc Lock; Screen Saver - Philips DVD728/001 Owner's Manual

Stop the program playback
0 During playback of the programmed tracks, press
STOP key. Then after you press PLAY key, the
DVD Player will resume normal playback.
Repeat the program playback
0 During playback of the programmed tracks, press
the REPEAT key. The programmed tracks can be
played again.

Display Dim

This function is used to adjust the brightness of
display on the front panel of the DVD Player.
Press the 34 keys to highlight DISPLAY DIM in
1
the GENERAL SETUP menu.
Enter its submenu by pressing the 2 key.
2
Press the 34 keys to highlight 100%/70%/
40% item.
3
Press OK to confirm.
Press the 1 key to return to the GENERAL
4
SETUP menu.

Disc Lock

When the disc is locked, the player will store its
specific code into the memory for future
identification. For the next playback, the DVD
Player will prompt you to enter the password.
Then, press OK to load the disc.
01-29 DVD728 Eng
1 Press the 34 keys to highlight DISC LOCK in
the GENERAL SETUP menu.
2 Enter its submenu by pressing the 2 key.
LOCK: Lock the disc being played.
UNLOCK: unlock the disc.
3 Press the 1 key to return to the GENERAL
SETUP menu.
Notes:
– When a locked disc is loading, the DVD Player
will prompt you to enter your password (842100
is the default password).
– To change the password , refer to the option
PASSWORD in the PREFERENCE SETUP menu .

Screen Saver

This function is used to turn the screen saver on
or off.
Press the 34 keys to highlight SCREEN SAVER
1
in the GENERAL SETUP menu.
Enter its submenu by pressing the 2 key.
2
Move the cursor by pressing the 34 keys to
3
highlight the selected item.
ON: In STOP or No DISC mode, if no
actions are performed within 5~6 minutes, the
screen saver will be activated.
OFF: Screen saver is disabled.
4
Press OK to confirm.
Press the 1 key to return to the GENERAL
5
SETUP menu.
19
Setup Menu
3139 246 12381
18/03/2003, 4:39 PM
19