Setup Menu; Basic Operation; General Setup Menu; Osd Language - Philips DVD728/001 Owner's Manual

Setup Menu

Basic Operations
1
Press SYSTEM MENU in the STOP mode to
enter the Setup Menu.
2
Press the OK key to go to the next level
submenu or confirm your selection.
Press the 1 2 keys to enter the submenu or
3
return to the previous menu.
4 Press the 34 keys to highlight the desired menu.
5
Press SYSTEM MENU to quit the setup menu.
When you quit the setup menu, the settings
will be stored in the player's memory even if the
player is switched to power off.

General Setup menu

Some settings need to be made in this menu.
They are: OSD LANGUAGE, PROGRAM,
DISPLAY DIM, DISC LOCK, and SCREEN
SAVER.
Follow the steps below:
1
Press the SYSTEM MENU key to enter the setup
menu.
Press the 34 keys to choose the GENERAL SETUP .
2
3
Press the OK key to confirm selection.

OSD language

This option is to select a language for
information displayed on TV screen.
Press the 34 keys to highlight OSD
1
LANGUAGE in the GENERAL SETUP menu.
2 Enter its submenu by pressing the 2 key.
Move the cursor by pressing the 34 keys to
3
highlight the selected language.
4
Press the OK key to confirm.
Press the 1 key to return to the GENERAL
5
SETUP menu.
18
01-29 DVD728 Eng
Program (not for Picture CD/MP3)
To choose PROGRAM, press 34 keys.
1
Press the 2 key to move the cursor to the field
2
of the submenu to choose the item ON.
ON: Enter the PROGRAM item.
3
Press OK to enter the programme page.
Input your favourite track
1
Input valid track number by pressing the
numerical keys.
Press the 1 234 keys to move the cursor to
2
the next selected position.
If the track number is more than ten, press
2™ to open the next page and go on
programming, or press 1 234 to highlight
NEXT button, and then press OK.
3
Repeat this steps to input another track number
until the whole programme is completed.
Remove a track
Press the 1 234 keys to move the cursor to
1
the track you want to remove.
2
Press OK or PLAY key to remove this track
from the programme menu.
Playback tracks
When programming is completed,
Press the 1 234 keys to move the cursor to
1
the START button.
2
Press OK.
DVD Player will playback the selected tracks
under the programmed sequence.
Quit the program playback
In the PROGRAM menu,
Press the 1 234 keys to move the cursor to
1
the EXIT button.
2
Press the OK key to quit this menu.
18
3139 246 12381
18/03/2003, 4:39 PM