Ricoh Caplio RR330 User Manual page 3

The symbol may be combined with other symbols to indicate that a specific action is prohibited.
Examples
Do not touch Do not disassemble
Observe the following precautions to ensure safe use of this equipment.
Danger
Do not attempt to disassemble, repair or alter the equipment yourself. The high-voltage circuitry in the equipment poses
significant electrical hazard.
Do not attempt to disassemble, alter or directly solder the battery.
Do not put the battery in a fire, attempt to heat it, use it in a high temperature environment such as next to a fire or inside
a car, or abandon it. Do not put it into water or the sea or allow it to get wet.
Do not attempt to pierce the battery with a needle, hit it with a hammer, stand on it, drop it or subject it to severe impact.
Do not use batteries that are significantly damaged or deformed.
Warning
Turn off the power immediately in the event of irregularity, such as the equipment emitting smoke or a strange smell. Remove
the battery as soon as possible, being careful to avoid electric shocks or burns. If you are drawing power from a household
electrical outlet, be sure to unplug the power cord from the outlet to avoid fire or electrical hazards. Discontinue use of the
equipment immediately if it is malfunctioning. Contact the nearest service center at your earliest convenience.
Turn off the power immediately if any metallic object, water, liquid or other foreign object gets into the equipment. Remove the
battery as soon as possible, being careful to avoid electric shocks or burns. If you are drawing power from a household electri-
cal outlet, be sure to unplug the power cord from the outlet to avoid fire or electrical hazards. Discontinue use of the equipment
immediately if it is malfunctioning. Contact the nearest service center at your earliest convenience.
Avoid any contact with the liquid crystal inside the LCD monitor, should the monitor be damaged. Follow the emergency
measures below in the following circumstances.
3