Charging The Battery - HTC 10 User Manual

28 Unboxing and setup
3. Push the tip all the way into the hole until the microSD card tray ejects.
4. Pull the microSD card tray out, and remove the microSD card.
After removing the microSD card, make sure that you insert the empty microSD card
tray back into the slot.

Charging the battery

Before you turn on and start using HTC 10, it is recommended that you charge the
battery.
§ If the battery has been discharged for several days, you may need to charge
HTC 10 for several minutes before powering it on.
§ Use only the adapter and the USB Type-C cable that came with HTC 10 to
charge the battery. When the battery power is too low, make sure to use the
power adapter to charge, not the USB cable connection with your computer.
1. Insert the small end of the USB Type-C cable into the USB Type-C connector.