Nespresso AGUILA-220 User Manual page 18

Alarms / Notifications
18
Description Display message
Cleaning of milk
Press 'cleaning' button for
system
3s to start cleaning
Milk system cleaning
Cleaning in progress 28:15:
mode
Milk temperature
Ready
high
Milk temperature too high
(6...12 °C)
Replace milk with
Ready
cold milk
Replace milk with cold milk
(over 12 °C)
Open lever
Open the lever
Preparation time too
Ready
long
Preparation too long
Preparation time too
Ready
short
Preparation too short
Heating up boiler
Heating up
Energy saving mode
Energy Saving mode:
Press any button
Maximum energy
saving mode
Brewing unit end
Brewing unit end of life!
of life
CCI not connected
CCI NOT CONNECTED
LED status
Please wait
Alternating
Alternating
Ready
Ready
Alternating
Ready
Remarks
Start cleaning procedure as described
on ► page 14 .
To quit menu, press any product button.
Display shows remaining cleaning time.
Normal operation.
Milk products are still available but
quality might be downgraded.
Replace milk with cold milk at 5 °C.
Milk products are locked.
Replace milk with cold milk at 5 °C.
Lift up the lever so that the used cap-
sule is ejected.
Open lever and try to insert new
capsule.
Ensure facility main water supply is
switched on.
If message appears repeatedly, call your
Nespresso representative.
Open lever and try to insert new
capsule. Message appears if no capsule
is inserted.
If message appears repeatedly, call your
Nespresso representative.
Slow flashing during heating.
If message remains for more than 30
min., call your Nespresso representative.
Boiler temperature reduced.
Machine will be ready within 1 min.
after pressing any product button.
To reactivate machine press "Energy
saving" button.
For more info ►see page 10 .
Immediately call your Nespresso
representative.
All products blocked. Rinsing and
cleaning still possible.
Check that the CCI connection is
properly installed. If the alarm remains
on, call your
Nespresso representative.