Aguila+ Button Programming; Alarms / Notifications - Nespresso AGUILA-220 User Manual

Menu Settings

- AGUILA+ button programming

Alarms / Notifications

What to do if a "Call techni-
cian" message appears?
Please call your Nespresso
representative.
AGUILA+ button programming
The AGUILA+ button offers
the choice of 13 one-touch
milk-based coffee recipes. To
select the one-touch recipe you
would like to be dispensed if
the AGUILA+ button is pressed,
follow the instructions below.
You can change your selection
at any time by repeating the
same steps.
Press rinse button for 3 sec.
USER MENU
GENERAL SETTINGS
Enter
GENERAL SETTINGS
AGUILA+
Enter
AGUILA+
◄ LATTE ►
Select the desired product.
Enter
Exit menu
Description Display message
Change water filter
Service required
Milk container empty
Ready
Milk level low
Ready
Automatic rinsing
Rinsing in progress
mode
(5 min. delay)
Cleaning required in
Ready
x.yy h.
Cleaning required in x:yy h
Milk system cleaning
Ready
required
Cleaning required
AGUILA+ recipes
CORTADO LUNGO
CORTADO
FLAT WHITE
CAPPUCCINO LUNGO
CAPPUCCINO CHIARO
CAPPUCCINO FREDDO
ICED CAPPUCCINO
LATTE GRANDE
LATTE
LATTE PICCOLO
ICED LATTE
MACCHIATISSIMO
COLD MILK
►See Nespresso Grand Cru
recommendation on page 3 .
LED status
Change water filter
Ready
Alternating
Service required
Ready
Alternating
Top up milk
Alternating
Milk level low
Alternating
Please wait
Alternating
Alternating
Remarks
Immediately call your Nespresso
representative.
Immediately call your Nespresso
representative.
Milk products are locked.
Fill up milk container (in fridge).
Indicates that the milk container will
soon be empty.
Fill up milk container (in fridge).
Automatic rinsing of internal milk
system starts 5 min. after last milk-
based beverage preparation. "Rinsing
in progress" and "Please wait" appear
on display. LEDs start to flash 10 sec.
before rinsing.
When timer ends, machine will be
locked until cleaned.
Milk products not available.
Start cleaning procedure as described
on ► page 14 .
EN
17