How To Remove "C-Drive Unit"; How To Remove "Lo-Motor-S-Assy"; How To Remove "M-Mtr Sub Assy"; How To Remove "Ud-Motor-Assy" - Clarion PN-3124N-A Service Manual

How to remove "C-DRIVE UNIT"

1. Remove the screw and DRIVE SPRING-A.
2. Rotate C-DRIVE UNIT internally.
3. Remove the washer, and remove C-DRIVE UNIT.
1
C-DRIVE UNIT
2
3

How to remove "M-MTR SUB ASSY"

1. Remove two screws, and remove M-MTR
SUB ASSY.
M-MTR SUB ASSY

How to remove "LO-MOTOR-S-ASSY"

1. Remove two screws and DRIVE CHASSIS-B.
2. Remove the screw of the bottom side.
3. Remove the solder of SENSOR-L-FPC, and remove
LO-MOTOR-S-ASSY.

How to remove "UD-MOTOR-ASSY"

1. Remove the screw of the bottom side, and remove
UD-MOTOR-ASSY.
1
UD-MOTOR-ASSY
- M5 -
DRIVE CHASSIS-B
2
LO-MOTOR-S-ASSY
3
SENSOR-L-FPC
1
1
929-0390-82