ABB SM3000 User Manual page 70

...4 CONFIGURATION
...4.4.6 e-mail
68
Enter the IP address of the SMTP server through which
e-mails are to be routed.
Enter the address(es) of the e-mail recipient(s).
Select the options to enable:
Channels Report
A summary of all enabled channels is included in the
e-mail, together with their instantaneous values.
Totalizers Report
A summary of all enabled totalizers is included in the
e-mail, together with their instantaneous values.
External Media Report
A summary of the condition of the external media (if any)
and archiving status is included in the e-mail.
Fig. 4.9 is an example of a reports e-mail.
Notes.
• Reports, when enabled, are included only on an
e-mail generated as a result of a real-time alarm event
unless the 'Reports in ALL emails' box is ticked, in which
case enabled reports are included on every e-mail
generated.
• Triggers 6 to 10, if enabled ('SourceType' set to anything
other than 'None' – see below), may be 'inverted', i.e. an
e-mail is generated when the trigger source becomes
inactive instead of active. Event trigger source types that
cannot be inverted are: Alarm acknowledge, Any alarm
and New alarm.
Select up to 10 event source types to generate an e-mail.
Fig. 4.10 is an example of an event-triggered e-mail.