ABB SM3000 User Manual page 29

...2.6 Process View
Totalizer Stop/Go
ch1.1 Volume
ch1.2 Pressure
ch1.3 In Flow
ch1.4 Volume A: Total Flow 1.3A
B: Total Flow 1.3B
ch1.5 Valve
ch1.12
All
Totalizer Reset
ch1.1 Volume
ch1.2 Pressure
ch1.3 In Flow
ch1.4 Volume A: Total Flow 1.3A
ch1.5 Valve B: Total Flow 1.3B
ch1.12
All
Alarm Acknowledge
ch1.1 Volume
ch1.2 Pressure
ch1.3 In Flow
ch1.4 Volume
ch1.5 Valve
ch1.12
All Group 1
AutoView Scroll
Stop and start individual totalizers.
Channel totalizers that have not been enabled in the Configuration level are greyed-out.
Note. When a totalizer is not running (i.e. 'Stop' is selected), the corresponding totalizer
value is shown in red.
 Stop
Go
Reset the totalizer value to the totalizer preset value.
Channel totalizers that have not been enabled in the Configuration level are greyed-out.
To acknowledge a particular alarm, use the
press the
Note. In Process View, inactive alarms in the current process group are indicated by a
grey Alarm Event icon next to the Alarm Tag. Active alarms are identified by a red Alarm
Event icon next to the Alarm Tag. Acknowledged alarms are identified by a red Alarm
Acknowledged icon next to the Alarm Trip Level – see Fig. 2.8, page 25.
To acknowledge all active alarms in the current process group simultaneously, select 'All'
and press the
Note. If an alarm in
continues to be displayed in the status bar. If an active alarm in
unacknowledged, the icon is surrounded by a red flashing border.
The short channel tags of individual alarms that have not been configured are greyed-out
in the menu.
Select AutoView Scroll to display the chart for each configured process group in turn for 40
seconds. The AutoView Scroll icon (
is active. Press any key to cancel AutoView Scroll.
key.
key.
process group is active, the Global Alarm status icon (
another
) is displayed in the status bar when AutoView Scroll
2 OPERATION...
and keys to highlight it in the menu and
process group is
another
)
27