ABB SM3000 User Manual page 32

...2 OPERATION
...2.7 Group Overview
Max/Min Reset
Group 1
Ch1
Group 2
Ch2
Group 3
Ch3
Group 4
Ch4
Group 5
Ch5
Group 6
Ch6
All Groups
Ch12
All
Alarm Acknowledge
Group 1
Group 2
Group 3
Group 4
Group 5
Group 6
All Groups
ch1.1 Volume
ch1.2 Pressure
ch1.3 In Flow
ch1.4 Volume
ch1.5 Valve
ch1.12
All
30
Reset the Maximum and Minimum value markers on one or all channels to the current
value.
Notes.
• These Maximum and Minimum values are for display purposes only. They are not saved
or archived and are not connected to the Totalizer Maximum and Minimum Values
displayed in the Process View.
• These Maximum and Minimum values are reset whenever the current configuration has
been changed or is re-saved.
Group Overview is not group specific therefore to acknowledge a particular alarm, use the
, and keys to select the group, highlight the alarm in the sub-sub-menu and
press the key.
Note. In Group Overview, active alarms are identified by a flashing red group tag field.
Acknowledged alarms are identified by a steady red group tag field – see Fig. 2.9, page 28.
To acknowledge all active alarms in all process groups simultaneously, select 'All Groups'
and press the key.
To acknowledge all active alarms in the selected process group simultaneously, select 'All'
and press the key.
Note. If an alarm in
another
continues to be displayed in the status bar. If an active alarm in
unacknowledged, the icon is surrounded by a red flashing border.
The short channel tags of individual alarms that have not been configured are greyed-out
in the menu.
process group is active, the Global Alarm status icon ( )
process group is
another