Table of Contents
Advertisement
Tool specifications
Model number
Stock number
Cutting disc size (Dia. x thickness)
Cutting disc hole diameter
Cutting capacity metal
Horsepower
Free speed (@90psi)
Average air consumption (@90psi)
Air inlet
Air hose inside diameter
Required air pressure
Vibration value
1
Noise level
Grip
Disc guard
Overall Length
Housing material
Net weight
Shipping weight
1
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As
workplace conditions vary, this information is intended to allow the user to make a better estimation of the
hazards and risks involved only.
Specifications were current at time of publication, but because of our policy of continuous improvement, JET
reserves the right to change specifications at any time and without prior notice, without incurring obligations.
JAT-483
505483
100 x 0.8 mm (4 x 1/32 in.)
9.6 mm (3/8 in.)
19~25.4 mm (3/4 – 1 in.)
1.0
14,000 RPM
4 CFM
1/4 in. NPT, swiveling
3/8 in.
90 psi (621 kPa)
2
3/8 m/s
85.5 dB(A)
Inline
steel, 126-degree, 11-position, rotating
14.6 in. (371 mm)
Composite
4.1 lb. (1.87 kg)
4.8 lb. (2.19 kg)
JET
5
Advertisement
Table of Contents
