The following table describes the fields of the Clients page.
Item
Select
MAC
IP
Location
AP-Name
AP-IP
AP-MAC
Client Type
Usage (KBytes)
Monitor the WiFi Network and Its Components
ProSAFE Wireless Controller
Description
The radio button that lets you select the client.
The MAC address of the WiFi client.
The IP address of the WiFi client.
Note the following:
•
If clients and the access point to which they are connected are in the same
VLAN, all receive an IP address from the same DHCP server.
•
If clients and the access point to which they are connected are not in the
same VLAN, you must provide a DHCP server for the client VLAN.
•
If clients are not connected to any DHCP server, IP addresses in the
169.254.x.x. range are assigned automatically.
The location of the access point (see
Managed AP List
on page 170) to which the WiFi client is connected.
The name of the access point (see
Managed AP List
on page 170) to which the WiFi client is connected.
The IP address of the access point to which the WiFi client is connected.
The MAC address of the access point to which the WiFi client is connected.
The wireless mode that the WiFi client is using to connect to the access point
(802.11ng, 802.11bg, 802.11b, 802.11ac, 802.11na, or 802.11a).
The traffic usage of the WiFi client in KB.
319
Change Access Point Information on the
Change Access Point Information on the