Table of Contents
Advertisement
8.
Configure the VRRP ID and local IP address of the primary controller (that is, the master) as
described in the following table.
These settings are required so that the primary controller and redundant controller can
establish a redundancy group.
The following table also includes descriptions of the nonconfigurable fields.
Setting
Controller Role
Controller IP
VRRP ID [1-255]
Local IP
ProSAFE Wireless Controller
Description
This is a nonconfigurable field that shows that the role of the primary controller.
In a 1:1 redundancy configuration, by default, the role is master.
This is a nonconfigurable field that shows the IP address of the primary
controller. This IP address is the address that you use to log in to the primary
controller's web management interface.
Note:
The controller IP address of the primary controller (the master) is also the
master IP address.
For the primary controller, enter a number from 1 through 255 as the VRRP ID.
This number must be unique and not assigned to any other device in the
network.
For the primary controller, enter a local IP address. If a failover occurs, this IP
address remains assigned to the primary controller and does not transfer to the
redundant controller to let you identify the primary controller before and after
the failover. You must enter an IP address that is not assigned to any other
device.
Manage Stacking and Redundancy
295
Hide quick links:
Advertisement
Table of Contents
