Table of Contents
Advertisement
5.
Click the tab for the profile group for which you want to configure the WiFi settings.
6.
Click the tab for the radio for which you want to configure the WiFi settings.
7.
Configure the settings in the table at the bottom of the page as described in the following
table.
Setting
AP Name
Access Point Channel
ProSAFE Wireless Controller
Description
The name of the access point.
Override these settings only if a specific need exists. From the menu, select a
channel and frequency for the access point to operate in.
Note:
Changing a channel might temporarily affect the traffic on the access point.
Note:
By default, the access point's channel and frequency are set to the ones
that are enabled for the radio and profile group. If the channel and frequency are
not available on the access point, the channel and frequency are set to the ones
providing the highest performance. For more information, see
Channels
on page 195.
Configure WiFi and QoS Settings
194
Configure
Hide quick links:
Advertisement
Table of Contents
