NETGEAR CG814WH Wireless Cable Modem Gateway
Appendix C: Installing the TCP/IP
Protocol
Follow these instructions to install the TCP/IP protocol on one of your PCs
only after a network card has been successfully installed inside the PC. These
instructions are for Windows 95, Windows 98, and Windows Me. For TCP/IP
setup under Windows NT, 2000, and XP, see your Windows documentation.
1. Click the Start button. Choose Settings and then Control Panel.
2. Double-click on the Network icon to bring up your Network window. Select
the Configuration tab.
Figure D-1
3. Click the Add button.
34