9.3.
Top cover
1. Remove the 2 screws (A) and 3 screws (B).
2. Slide Top Cover rearward and open the both ends at rear
side of the Top Cover a little and lift the Top Cover in the
direction of the arrows.
9.4.
Front Panel
1. Unlock 6 tabs in (A) - (F) turn.
Pull with the front panel in the direction of your side.
9.4.1.
How to assemble Tray door ass'y
1. Apply about 0.1g lubricant to each part inside the tray
shaft.
2. Attach the Tray door spring to Tray door ass'y.
3. Attach Tray door ass'y in order from
Insert the shaft in the hole.
Insert the shaft in the hole.
4. Confirm the Tray door spring is attached as following.
9.5.
Front (L) P.C.B., Front (R)
P.C.B.
1. Remove the 2 Screws (A) to remove the Front (L) P.C.B.
and Front (R) P.C.B.
36
to
.