Panasonic DMR-EH59GC Service Manual page 20

Error Code Diagnosis Contents
H19 Inoperative fan motor
F00 No error information
F58 Drive hardware error
F34 Initialization error when
main microprocessor is
started up for program
recording
F74 HDMI Device Key
Communication error.
F75 HDMI Device Key Information
error
UNSUPPO Unsupported disc error
RT
NO READ Disc read error
HARD Drive error
ERR
SELF Restoration operation
CHECK
PLEASE Unit is in termination pro-
WAIT cess
UNFORM Unformatted disc error
AT
Description
When inoperative fan motor is detected after
powered on, the power is turned off
automatically.
The event is saved in memory.
Initial setting for error code in memory (Error
code Initialization is possible with error code
initialization and main unit initialization.)
When drive unit error is detected, the event
is saved in memory.
When initialization error is detected after
starting up main microprocessor for program
recording, the power is turned off
automatically.
The event is saved in memory.
HDMI connection could not be authenticated
due to a transfer malfunction.
Factor of HDMI Device key-road failure
• When HDMI LSI is damaged.
• When the bus line of I2C does not
operate normally.
• When device key information recorded is
damaged.
HDMI connection could not be authenticated
due to a transfer malfunction.
Factor of HDMI Device key-road failure
• When HDMI LSI is damaged.
• When the bus line of I2C does not
operate normally.
• When device key information recorded is
damaged.
*An unsupported format disc was played,
although the drive starts normally.
*The data format is not supported, although
the media type is supported.
*Exceptionally in case of the disc is dirty.
*A disc is flawed or dirty.
*A poor quality failed to start.
*The track information could not be read.
The drive detected a hard error.
Since the power cord fell out during a power
failure or operation, it is under restoration
operation.
*It will OK, if a display disappears
automatically. If a display does not
disappear,there is the possibility that
defective Digital P.C.B. / RAM drive.
Unit is in termination process now.
"BYE" is displayed and power will be turned
off.
In case "Quick Start" of setup menu is ON, it
is displayed in restoration operation for AC
off.
You have inserted an unformatted DVD-
RAM or DVD-RW that is unformatted or
recorded on other equipment.
20
Monitor Display Automatic FL display
No display No display
No display No display
No display No display
No display No display
No display
No display
"This disc is
incompatible."
Display for 5 seconds.
"Cannot read.
Please check the
disc."
"DVD drive error." Display for 5 seconds.
No display
No display