Mounting The Mechanical Bracket For The Baseunit - Siemens Simantic ET200SP System Manual

4.8.2

Mounting the mechanical bracket for the BaseUnit

Introduction
To achieve higher stability, you can use a mechanical bracket on 7.5 mm and 15 mm
mounting rails.
You must use the mechanical bracket in the following situations:
● When using a 15 mm mounting rail
● With a vertical mounting position
● For applications according to shipbuilding standards in all mounting positions with 7.5 mm
and 15 mm mounting rails
You can find further information on the mechanical bracket in chapter "Installation conditions
for motor starters (Page 58)".
Distributed I/O system
System Manual, 12/2016, A5E03576849-AG
4.8 Mounting further accessories for motor starters
Installation
71