Ink Concentration Control - Hitachi IJ RX2 Service Manual

2.7 Ink concentration control

●
Select whether or not the ink concentration is controlled based on results of the viscosity
measurement.
Perform these settings at "Stop" state.
●
Setting items of circulation environment setup screen
Item
Ink concentration control
1 Press Circulation environment setup Start/Continue on the second page of
the circulation control menu of maintenance.
The circulation environment setting screen is then displayed.
Circulation env. setup
Ink type
Ink concentration control
*Caution: 1. Under ordinary circumstances, the default setting of "ink concentration control"
is "Enable."
2. "Enable" can not be selected for some inks.
In this case, ink concentration is not controlled by the viscometer,
but is controlled by dot count.
Selection
The ink concentration is controlled by the
dot count control without measurement of
the ink viscosity.
Disable
(Dot count control: Amount of ink which is
used for printing and vaporized makeup
are automatically refilled.)
The ink concentration is controlled based
Enable
on results of the viscosity measurement.
[Stop ]
002 (JP-K69)
Disable Enable
The default setting is "Enable."
2-24
Contents
Com=0 2015.07.07 12:45
HOME
Back