Hitachi IJ RX2 Service Manual page 213

6.3.14 Invalid Data Change Timing
6.3.15 Invalid Count Data Change Timing
6.3.16 Invalid Print Start Timing
Invalid ******** Timing
Resume the
operation.
SUPPLEME
NT
The print target detection signal entered while the printer was not
ready. See that the print target detection signal enters after a while.
6.3.17 Ink Shelf Life Information
Use ink within its expiration date at replacement,
and input the ink lot number on unit information screen.
6.3.18 Makeup Shelf Life Information
Use makeup within its expiration date at replacement,
and input the makeup lot number on unit information screen.
Ink Shelf Life
Information
Resume the
operation.
Makeup Shelf Life
Information
Resume the
operation.
6-34