Ducati SUPERBIKE 1199 PANIGALE ABS Owner's Manual page 59

customized by the rider through the setting function
pages.
Attention
Ducati recommends changing the Riding mode
when the vehicle is stopped. If the riding mode is
changed while riding, be very careful (it is
recommended to change the Riding mode at a low
speed).
Selecting the Riding Mode
Press CONFIRM MENU button (4) to enter the menu
for selecting the Riding Mode (A). The instrument
panel displays the speed indication (on the right) and
riding mode name (on the left):
- RACE
- SPORT
- WET
One of these will be highlighted to indicate that it was
the last memorized setting and is currently in use.
58
Attention
It is not possible to open the menu for selecting
the riding mode, if button (4) is in the position for
activating the turn indicators (to the left or right)
For the highlighted Riding Mode some of the
parameter settings are displayed:
- DTC: the DTC text followed by the level of
intervention set (1, 2, 3, 4, 5, 6, 7, 8) in case the
DTC is active or by OFF in case the DTC is
disabled;
- EBC: the EBC text followed by the level of
intervention set (1, 2, 3) in case the EBC is active
or by OFF in case the EBC is disabled;
- engine power (ENGINE): the ENG text followed
by the set engine power; power indication may
be 195 Hi, 195 Lo or 120; in some countries (such
as France and Japan) HIGH, MED or LOW are
used;
- DQS: the DQS text followed by ON in case the
DQS is active or by OFF in case the DQS is
disabled;
- ABS: the ABS text followed by the level of
calibration set (1, 2, 3) in case the ABS is active
or by OFF in case the ABS is disabled.