Ducati SUPERBIKE 1199 PANIGALE ABS Owner's Manual page 150

Viewing/deleting the DDA memory
When accessing the function, the DDA memory
status is shown on the right as a percentage:
- when bar is empty and text EMPTY is shown, it
means that the DDA memory is empty;
- when bar is partially colored and a percent is
indicated, it means that the DDA memory is used
for the specified percentage;
- when bar is full and text FULL is shown, it means
that the DDA memory is full.
With DDA OFF, you can delete the memory. Select
"ERASE" option, by pressing button (1) or (2).
Press CONFIRM MENU (4) for at least 3 seconds to
confirm.
After 3 seconds, the instrument panel will read
"PLEASE WAIT..." for as long as the deletion is
completed, which will depend on the quantity of data
to be deleted.
If deletion is successful, the dashboard will read
ERASE OK for 2 seconds and refresh the memory
status displayed. If deletion is not successful, the
dashboard will still show memory used status.
To exit the menu and go back to previous page, select
EXIT and press button (4).
Attention
If the DDA is set to "ON" the deletion is
inhibited and you can not even select the ERASE
option.
149