Sscnet Cable Precautions - Mitsubishi QD75M1 User Manual

(5) To make this product conform to the EMC directive and low voltage instruction, be sure
to used of a AD75CK type cable clamp (manufactured by Mitsubishi Electric) for
grounding connected to the control box and the shielded cable/ the SSCNET cable.
20cm(7.88inch)
to 30cm(11.82inch)
[How to ground shielded cable using AD75CK]
Using the AD75CK, you can tie four cables of about 7mm outside diameter together
for grounding.

5.2 SSCNET Cable Precautions

If the duct is below the bottom of the module, leave sufficient clearance to eliminate
effects on the SSCNET cable, limit the space height to 70 mm (28.6 inch) MIN.
Inside control box
AD75CK
Shielded cable
Shield
Installation screw to control box (M4 screw)
Ground terminal
Ground terminal installation screw (M4 8 screw)
9