Ricoh SP C352dn User Manual page 77

Message
"Exceeded max. pages.
Collate is incomplete."
"Exceeded the maximum
unit count for Print Volume
Use. The job has been
cancelled."
"Failed to obtain file
system."
"File system is full."
"HDD is full."
"HDD is full."
"HDD is full. (Auto)"
Cause
The number of pages exceeds the
maximum number of sheets that
can be used with Collate.
The number of pages the user is
permitted to print has been
exceeded.
PDF direct printing could not be
performed because the file system
could not be obtained.
The PDF file does not print out
because the capacity of the file
system is full.
The hard disk became full while
printing a Sample Print, Locked
Print, Hold Print, or Stored Print
file.
When printing with the PostScript
3 printer driver, the hard disk
capacity for fonts and forms has
been exceeded.
The hard disk became full while
using the error job store function
to store Normal Print jobs as Hold
Print files.
When Messages Are Displayed
Solution
Reduce the number of pages to
print.
For details about Print Volum. Use
Limit., see "Managing Print
Volume Per User", Security Guide.
Turn off the main power switch
and then back on again. If the
message appears again, contact
your service representative.
Delete all unnecessary files from
the hard disk, or decrease the file
size sent to the printer.
• Delete unneeded files stored
in the printer.
• Reduce the data size of the
Sample Print, Locked Print,
Hold Print, or Stored Print
file.
Delete unneeded forms or fonts
registered in the printer.
• Delete unneeded files stored
in the printer.
• Reduce the data size of the
Temporary Print file and/or
the Stored Print file.
75