Canon WFT-E8 Instruction Manual page 92

Using the Transmitter with WFT Server
92
Enter the encryption key.
6
Enter a 5-digit encryption key

(password) and press the <M>
button.
Set the key entered here on the

computer in order to connect to the
master camera from the computer.
On the slave cameras, select
7
[OK].
On all slave cameras, select [OK].

On the master camera's LCD monitor,

the number of slave cameras
detected is displayed.
On the master camera, select
8
[OK].
Check the number of slave cameras,

then select [OK].
On all cameras, select [OK].
9
On the master camera and all slave

cameras, select [OK].
Settings information is stored in the

camera. It is not stored in the
transmitter.