Canon WFT-E8 Instruction Manual page 91

Connecting the Master and Slave Cameras
Using the Transmitter with WFT Server
Set up the slave cameras.
1
Perform steps 1 to 6 on page 84 for

the cameras to use as slaves. When
the next screen is displayed, the
slave cameras are ready.
Set up the master camera.
2
Perform steps 1 to 5 on page 84 for

the camera to use as the master, then
select [Master].
Select [OK] and press <0> to go to

the next screen.
Select [Manual connect].
3
Select [OK] and press <0> to go to

the next screen.
Select connection method.
4
Select the wireless LAN ad hoc mode

supported by the computer.
Select [OK] and press <0> to go to

the next screen.
Specify the channel.
5
When selecting [Manual setting],

specify the same channel on the
master camera, slave cameras, and
computer.
Select [OK] and press <0> to go to

the next screen.
91