Configuring Eos Utility Connection Settings - Canon WFT-E8 Instruction Manual

Configuring EOS Utility Connection Settings

These instructions are continued from Chapter 1.
To establish a connection, operations on the computer are required.

For details, refer to the computer's instruction manual.
The configuration procedure is as follows, using Windows 8.1 as an

example.
Operation on the Camera-1
Operation on the Computer
56
Select [OK].
1
Select [OK] and press <0>. The

following message is displayed.
"******" represents the last six digits of
the MAC address of the transmitter.
Start EOS Utility on the computer.
2
In EOS Utility, click [Pairing over
3
Wi-Fi/LAN].
If a firewall-related message is

displayed, select [Yes].