Print Quality/Layout Problems; Проблемы С Качеством Или Макетом Печати; Проблеми З Якістю Друку/Макетом; مشكالت جودة الطباعة - Epson SX410 Series Basic Operation Manual

Print Quality/Layout
Problems
Проблемы
с качеством
или макетом печати
Проблеми з якістю
друку/макетом.
‫مشكالت جودة الطباعة‬
‫مشکالت کیفیت/طرح‬
‫چاپ‬
Try the following solutions in order from the Top. For further information, see your online User's Guide.
EN
Problems
You see banding (light lines) in your printouts or copies.
Your printout is blurry or smeared.
Your printout is faint or has gaps.
Your printout is grainy.
You see incorrect or missing colors.
The image size or position is incorrect.
Solutions
Make sure you select the correct paper type.
A
Make sure the printable side (the whiter or glossier side) of the paper is facing in the right direction.
B
When you select Standard or Best as the Quality setting, select Off as the Bidirectional setting. Bidirectional printing
C
decreases print quality. & 37
R
& 42
Clean the print head.
D R
Align the print head. & 44
E R
If quality is not improved, try aligning using the printer driver utility. See your online User's Guide to align the print head.
To clean the inside of the printer, make a copy without placing a document on the document table. For further information,
F
see your online User's Guide.
Use up ink cartridge within six months of opening vacuum package.
G
Try to use genuine Epson ink cartridges and paper recommended by Epson.
H
If a moiré (cross-hatch) pattern appears on your copy, change the Zoom setting or shift the position of your original.
I
Make sure you selected the correct Paper Size, Layout, Expansion, and Zoom setting for the loaded paper.
J
Make sure you loaded paper and placed the original correctly.
K
If the edges of the copy or photo are cropped off, move the original slightly away from the corner.
L
Clean the document table. See your online User's Guide.
M
& 16
R
& 55
R
& 18, 22
R
Solution No.
ABDEGI
ABDEFH
ABCDG
E
DG
JKLM
& 18
R
& 28, 37
R
1