Honeywell FocusPRO TH6110D Installation Manual page 7

FocusPROT_TH6110 / TH6220
Shaded areas below apply _ to TH6220D.
9 Stage t compressor 3 Recommended for most compressors
cycle rate (CPH) [Other cycle rate options: 1,2, 4, 5 or 6 CPH]
!0 Stage2cQmpressor 3 Recommended for moat compressors
cycle rate (CPH) [Other cycle rate options: 1,2, 4, 5 or 6 CPH]
12 Manual/Auto
changeover
13 Adaptive intelligent
Recovery
TM
14 Temperature
display
15 Compressor
protection
0 Manual changeover (Heat/Cool/Off)
1 Auto changeover (Heat/Cool/Auto/Off) **See page 8
2 Auto changeover only (Auto) **See page 8
t On**See page 8
0 Off
Fahrenheit
Celsius
Five-minute compressor off time **See page 8
[Other options: 0, 1,2, 3 or 4-minute off time]
16 Schedute format
27 Heat temperature
range stops
0 512 (programmable weekdays and weekends)
1 5/1/1 (weekdays, Saturday & Sunday programmable)
90
Max. heat temperature setting is 90 ° F [32 ° C)
[Other options: 40 ° F to 89 ° F (4.5 ° C to 31.5 ° C)]
28 Cool temperature 50 Min, cool temperature setting is 50 ° F (10 ° C)
range stops [Other options: 51 ° F to 99 ° F (10.5 ° C to 37 ° C)]
' Test number System status
n
u
y_p
To begin, press and hold t e A and _ ress A / V to turn system on/off.
buttons until the display changes. Press NEXT to advance to next test.
Press DONE to terminate system test.
Shaded areas below apply _ to TH6220D.
to Heating system 0 Heat and fan turn off.
1 Stage 1 heat turns on. Fan turns on if Setup Function 1 is set to 1
or 5 OR Setup Function 3 is set to 1 **See page 6
2 Stage 2 heat turns on
20 Emergency heating 0 Heat and fan turn off
system 1 Heat and fan turn on
2 Stage 2 heat turns on (auxiliary heat)
30 Cooling system 0 Compressor and fan turn off
1 Compressor and fan turn on
2 Stage 2 compressor turns On
40
Fan system 0 Fan turns off
1 Fan turns on
CAUTION= Compressor protection is bypassed during testing. To prevent equipment
damage, avoid cycling the compressor quickly.