Honeywell FocusPRO TH6110D Installation Manual page 5

FocusPROT_TH6110 / TH6220
. !
Shaded areas below apply _ to TH6220D.
1H/tO Heat
Pump System
G o/B c Y R Rc
Power t11
[R+Rs joined by jumper]
Y Compressor oontaotor
C 24VAC common [3]
O/g Changeover valve [7]
G Fan relay
2.1tC .,,t
PumpSYStem
L EAuxGO/sc Y R Rc
(TH6220D only) [8]
rRC Power[1]
L. R [R+Ro joined by jumper]
Compressor oontaotor
C 24VAC common [3]
O/8 Changeover valve [7]
G Fan relay
Aux Auxiliary heat relay [10]
E Emergency heat relay [10]
L Sends output when set to Era. Heat [9]
See [notes] an page 4,
Align the 4 tabs on the wallplate with m m _;>\
slots on the back of the thermostat, '', _"\
then push gently until the thermostat i// i_
\
snaps in place. _Y
o [] ",, m _;',
Push excess wire back into / , _
the wall opening.
Plug wall opening with
non-flammable insulation.