Brightness, Contrast, Colour And Sharpness; Dnr - Orion TV-32082 Operating Instructions Manual

Brightness, Contrast, Colour and Sharpness/DNR
Notes:
• To reset BRIGHTNESS,
CONTRAST, COLOUR, TINT and
SHARPNESS to the factory preset
values, select RESET in step 1 then
press or .
• In HDMI or COMPONENT mode, the
"DNR" option cannot be selected.
22
3Z70146B_En_P18-25

Brightness, Contrast, Colour and Sharpness

1
Select BRIGHTNESS. Then press
brightness.
If you wish to set the contrast, colour, tint, or
sharpness, press
COLOUR, TINT, or SHARPNESS. These can all be
adjusted in the same way.
The "TINT" option can be selected if an NTSC 3.58MHz
signal is input through one of the AV sockets, and NTSC or
AUTO has been selected for the AV COLOUR option (see
P.36).
2
Press EXIT to return to the normal screen.

DNR

DNR (Digital Noise Reduction) can reduce the roughness of
the picture.
1
Select DNR. Then press
2
Press EXIT to return to the normal screen.
22
B R I G H T N E S S 2 5
C O N T R A S T 2 5
C O L O U R 2 5
T I N T 0
S H A R P N E S S 2 5
D N R O F F
: SELECT : ADJUST
EXIT : END MENU : RETURN
or to select CONTRAST,
or to select ON or OFF.
B R I G H T N E S S 2 5
C O N T R A S T 2 5
C O L O U R 2 5
T I N T 0
S H A R P N E S S 2 5
D N R O N / O F F
: SELECT : ADJUST
MENU : RETURN
EXIT : END
10/6/06, 1:39 PM
or to adjust the