Basic Operation - Orion TV-32082 Operating Instructions Manual

Channel selection
With the numbered buttons.
Example:
• No. 2: Press 0 and within 2 seconds, press 2.
The station stored on CH 2 will appear.
• No. 29: Press 2 and within 2 seconds, press 9.
The station stored on CH 29 will appear.
Note:
If the built-in tuner does not receive
anything (e.g. if no antenna is
connected) during TV-operation, then
the TV-unit will change to standby after
approx. 15 minutes.
3Z70146B_En_P11-17
QuickView
button allows you to go back to the last selected
channel.
Volume adjusting
Press
indicator disappears after 4 seconds.
MUTE
Press
approx. 4 seconds.
The muting can be released by pressing
Information display
Press once. Channel
number and wide screen
type will appear. (The
display will disappear after
4 seconds.)
During display above,
press again. The screen
displays the clock and
program information if this is currently available.
SLEEP TIMER
To set the sleep timer press
. SLEEP and the minutes
until shut-off will appear.
Each time you press
SLEEP time shown will
change. When the
displayed time runs out, the
unit will switch to standby.
The display will disappear after approx. 4 seconds
To cancel the sleep timer:
Press
Still picture
Press FREEZE to make a still picture. To cancel the still
picture, press FREEZE again.
Notes:
• When this function is not available, "NOT AVAILABLE" will
appear.
• The still image automatically goes out after 30 minutes.
17

Basic Operation

Press P or to change up or down a channel.
This takes approx. 2 seconds. If the auto search
only stored 5 stations, only these 5 will appear.
Skipped channels will not appear (see P.32).
+ or – to adjust the volume. The volume level
. The sound will be cut off. MUTE will appear for
S T E R E O
A U T O
the
repeatedly until "0" appears.
10/6/06, 1:39 PM
again or + or –.
C H 1
S L E E P
1 2 0
17