Figure 4-46 Wireless Setup — MAC Filter
1. When you select Allow in MAC Restrict Mode, only MAC
addresses in the filter table can access HG520.
2. If you select Deny in MAC Restrict Mode, all MAC addresses
except that in the filter table can access HG520.
3. If you select Disabled, then this function will not be activated.
4. Click Add to add a filter rule and enter the MAC address that you
want to control.
5. Click Save/Apply to save the configuration.
6. To delete a configuration rule, select the Remove check box.
Then click Remove.
4.5.4 Configuring Wireless Bridge
Wireless bridges have ports that connect two or more separate
Ethernet LANs. The bridge receives packets on one port and
Huawei Technologies Proprietary
65