2.2 Power on/off HG520
1)
To power on HG520, plug the power adapter into the power
jack, and press the power switch to the ON position.
2)
Check the LEDs. Refer to 6.1 if any LED does not light up
when powering on.
3)
To power off, press the power switch to the OFF position,
and then unplug the power adapter from the power jack.
2.3 Getting online
PPPoE dial-up users need to obtain an account with username
and password provided by the ADSL ISP, and have the PPPoE dial-up
application installed on the PC. User is able to start surfing the Internet
by entering the username and password after executing the PPPoE
dial-up application.
If other connection methods are used to access the Internet,
users need to configure the HG520 in compliance with the actual
situation before you can use the modem.
Note:
The factory default IP is 192.168.1.1. Log onto the HG520 (both the default user
name and password are "admin") to check the Internet connection status. Please
contact the ISP in case of any need for changing the modem's configurations.
Be sure the device has to be stored, transported, and operated in a non-humid
and dust-free environment. Be careful not to drop down the device.
Huawei Technologies Proprietary
13