Configuring Basic Features - Huawei EchoLife HG520 User Manual

4.5.1 Configuring Basic Features

This page allows you to configure basic features of the wireless
interface.
Figure 4-37 Wireless Setup — Basic
Follow the steps below to configure the basic wireless setting:
Check Enable Wireless to activate the wireless function.
Check Hide Access Point from active scans. If this function
is checked, other clients cannot know the existence of your
access point. If it is not checked, you open this access point
for others to access as long as they pass the authentication.
Enter the SSID name. (SSID = Service Set Identifier)
Select the Country that you are using the wireless.
Check Enable Guest SSID so that when the main SSID
does not work you can use the guest SSID to access WAN.
Click Save/Apply to save the configuration.
Huawei Technologies Proprietary
54