Chapter 2 Installation
2.1 Connecting Cables
Place HG520 in a safe and accessible location where you can
easily view the LED indicators on the front panel of the device.
HG520 should be connected to a phone port, a power socket,
and a computer or the network before it functions.
Caution:
If you need to install a telephone between HG520 and the wall socket, make sure you
install a splitter first to prevent loss in voice quality.
You are now ready to connect HG520. Follow these steps:
I. Disconnect the power – Make sure you turn off the power for
the computer and HG520.
II. Connect the ADSL cable
Use a telephone cable to connect the DSL interface of HG520 to
either of the following interfaces:
Huawei Technologies Proprietary
11