Machine Controls; How To Remove The Steering Column; How To Remove The Steering Wheel - Genie GTH-1056 Service And Repair Manual

From gth1016e-11305 to gth1016e-11799 includes gth1016e-11281 gth1016e-11282 gth1016e-11286 from gth10e-11800
Hide thumbs Also See for GTH-1056:
Table of Contents

Advertisement

Service and Repair Manual
Operator's Compartment
2-2

Machine Controls

How to R emove the Steering C olumn
How to Remove the Steering
Column
1
Disconnect the battery from the machine.
Electrocution/burn hazard.
Contact with electrically charged
circuits could result in death or
serious injury. Remove all rings,
watches and other jewelry.
2
Remove the fasteners securing the
transmission control lever and turn signal
shifter, if equipped, to the column. Carefully
separate the lever from the column.
3
Remove the nut securing the key switch to the
dash panel. Gently push the key switch
through the opening.
4
Remove the fasteners securing the dash panel
to the dashboard.
5
Carefully pull the dash panel towards the seat
of the operator's compartment.
6
Tag and disconnect the wire harness from the
componments of the dash panel. Remove the
dash panel from the machine.
7
Loosen the two lower fasteners securing the
dash frame to the operator's compartment.
8
Remove the two upper fasteners securing the
dash frame to the operator's compartment.
9
Rotate the dash frame towards the seat of the
operator's compartment.Remove the
dashboard from the machine.
10 Tag and disconnect the ground wire of the
steer column.
11 Support and secure the steer orbitral to the
dash frame.
12 Remove the fasteners securing the steer
column and steer orbitral to the dash frame.
13 Lower the steer orbitral and remove the steer
column from the machine.
38
How to R emove the Steering Wheel
How to Remove the Steering
Wheel
1
Open the access door above the hydraulic
tank.
2
Disconnect the battery from the machine.
3
Remove the horn button from the steering
wheel. Remove the nut securing the steering
wheel to the column and remove the steering
wheel.
GTH-1056
April 2017
Electrocution/burn hazard.
Contact with electrically charged
circuits could result in death or
serious injury. Remove all rings,
watches and other jewelry.
Part No. 1278145

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents