MAINTENANCE AND SERVICE
||
2. Unplug the connector from the bulb.
3. Detach the bulb by pushing it gently upwards
and pulling it straight out.
4. Fit a new bulb in the socket. The bulb's guide
pin must be aimed straight upwards.
5. Press in the connector.
6. Refit the headlamp's round rubber cover.
Related information
•
Bulb replacement (p. 545)
•
Bulb specifications (p. 550)
548
Removing the headlamp's oval
cover
Most of the headlamp's bulbs become accessi-
ble when the oval cover has been removed.
Before the oval cover can be removed, the plastic
cover over the headlamp must be removed; see
the section "Bulb replacement".
Left-hand headlamp.
1. Unscrew the cover's four screws using a Torx
tool, size T20 (1). They must not be screwed
all the way out, 3 - 4 turns is enough.
Slide the cover to one side.
3. Remove the cover.
Reinstall the cover in reverse order.
Related information
•
Replacing the main beam lamp (p. 549)
•
Replacing daytime running light bulb/posi-
tion lamp bulb, front (p. 549)
•
Replacing the front direction indicator bulb
(p. 550)
•
Bulb replacement (p. 545)