Fitting And Removing Cargo Cover; Operating Cargo Cover - Volvo XC90 2019 Owner's Manual

Twin engine
Hide thumbs Also See for XC90 2019:
Table of Contents

Advertisement

LOADING, STORAGE AND PASSENGER COMPARTMENT

Fitting and removing cargo cover*

In the extended position, the cargo cover pre-
vents visual access to the cargo area.
Fitting cargo cover
Insert one of the cargo cover's end pieces
in the recess in the side panel in the cargo
area.
Then insert the other end piece in the
recess in the side panel on the opposite
side.
Press down the end pieces on both sides -
one by one.
> When a "click" is heard and the red
marking on each end piece has disap-
peared, the cargo cover is attached -
check that it is affixed securely.
620
Removing cargo cover
In retracted position:
1.
Depress the button on one of the retracted
cargo cover's end pieces and lift out that
end.
In a 7-seat car - release the third seat
row's seatbelt locking tabs from the hooks
above the side panels.
2. Angle the cover up/out carefully.
> The other end piece loosens automati-
cally and the cover can be lifted out of
the cargo area.
Related information
Operating cargo cover* (p. 620)
Recommendations for loading (p. 617)

Operating cargo cover*

There are two extended positions for the
cargo cover - a full-cover position and a load-
ing position, where it is partially extended to
make it easier to reach further into the cargo
area.
* Option/accessory.

Advertisement

Table of Contents
loading

Table of Contents