Denon LA-3500 Service Manual page 24

-LA-3500
24
2. Insert Gear (A)
@
to the Shaft shown above and then insert the Pulley Gear
@
to the Shaft and push it until the Pulley Gear
is hooked.
3. Install cam Stopper
@
to the position shown above and insert Gear (8)
@
to the Shaft and push it until the Shaft is
hooked .
4. Insert Slide Cam (Left)
®
to arrow direction and
move
until the hook strikes
@ .
5. Set the Belt
@
to the pulley of Loading Motor Sub-Ass'y
@
and Pulley Gear
@ .
Note: Confirm the belt is clean and free of grease.
First Gear Tip
t
@
Control Gear
®
@ Gear (B)
Concave
@
Slit Washer
@
Cam Stopper
@
Slide Cam (Left)
Cl)
Drive Base Ass'y
6. Confirm the concave of Slide Cam (Left)
®
is seated at the position shown above,
move
Cam Stopper
@
to arrow direction
© ,
insert Control Gear ®to the shaft shown above, and confirm the first gear tip is apart from Gear (8) by
2-6
mm, and then
fasten it with Slit Washer
@ .
7l7 After the installation, turn control Gear
@)
to arrow direction
@
and confirm the Slide Cam (Left)
®
moves to arrow
direction
@ .
Then revert the position so that the first gear tip of control Gear
@
sets to the position shown above.