Replacing the bulb for the turn signal light (Halogen headlights)
Fig. 107 Changing the bulb for the turn signal light
Read and observe
and
›
Remove the protective cap
» fig. 100
E
›
Remove the pedestal with the bulb by jiggling it out in the direction of arrow
» fig.
107.
1
›
Grasp the pedestal with the light bulb in the region
rection of arrow
.
2
›
Insert a new bulb in the bulb holder up to the stop.
›
Replace the bulb holder in the headlamp with the bulb.
›
Fit protective cap
» fig. 100
E
104
Do-it-yourself
on page 101 first.
on page 101.
and pull out in the di-
A
on page 101.
Replacing light bulbs for fog lights
Fig. 108 Remove the number plate light / replace the bulb
Read and observe
and
Remove the protective grille and headlight
›
Insert the clamps for removing the full wheel trims into opening
›
By pulling the hook in direction of arrow
the arrow direction
» fig.
108.
2
›
Unscrew the screws
with the screwdriver from the tool kit.
B
›
Using a screwdriver, Unlock the fuse
›
Remove the headlight in the direction of arrow
Replacing the light bulb
›
Press the latch on the connector in the direction of arrow
›
Remove the key in the direction of the arrow
›
Turn the socket with the bulb to the stop in the direction of the arrow
›
Remove the socket with the bulb in the direction of arrow
›
Insert the new bulb into the headlight and turn counter to the direction of
arrow
as far as the stop.
7
›
Fit the connector.
on page 101 first.
remove the protective grille in
1
in the direction of arrow
C
.
4
» fig.
5
.
6
.
8
» fig.
108.
A
.
3
108.
.
7