Selecting Aux As The Source; Setting The Aux Title - Pioneer FH-P6200 Operation Manual

Section
11 Other Functions

Selecting AUX as the source

% Press SOURCE upward or downward to
select AUX as the source.
Press SOURCE until AUX appears in the dis
play.
# If the auxiliary setting is not turned on, AUX
cannot be selected. For more details, see Switch
ing the auxiliary setting on page 37.

Setting the AUX title

The title displayed for the AUX source can be
changed.
1 After you have selected AUX as the
source, press FUNCTION and hold until
TITLE IN appears in the display.
2 Press 1 numbered button to select the
desired character type.
Press 1 numbered button repeatedly to switch
between the following character type:
Alphabet (upper case), numbers and symbols
Alphabet (lower case)
# You can select to input numbers and symbols
by pressing 2 numbered button.
3 Press a or b to select a letter of the al-
phabet.
Each press of a will display a letter of the al
phabet in A B C ... X Y Z, numbers and sym
bols in 1 2 3 ... @ # < order. Each press of b
will display a letter in the reverse order, such
as Z Y X ... C B A order.
40
En
4 Press d to move the cursor to the next
character position.
When the letter you want is displayed, press d
to move the cursor to the next position and
then select the next letter. Press c to move
backwards in the display.
5 Move the cursor to the last position by
pressing d after entering the title.
When you press d one more time, the entered
title is stored in memory.
6 Press BAND to return to the playback
display.