Table of Contents
Advertisement
Section
09
Digital Signal Processor
2
Press c or d to select an equalizer
curve.
Each press of c or d selects equalizer curves
in the following order:
S-BASSPOWERNATURALVOCAL
FLATCUSTOM1CUSTOM2
Adjusting equalizer curves
The factory supplied equalizer curves, with the
exception of FLAT, can be adjusted to a fine
degree (nuance control).
1
Recall an equalizer curve.
See Recalling equalizer curves on the previous
page.
2
Press a or b to adjust the equalizer
curve.
Each press of a or b increases or decreases
the equalizer curve respectively.
+6 5 (or 6) is displayed as the equalizer
curve is increased or decreased.
# The actual range of the adjustments are differ
ent depending on which equalizer curve is se
lected.
# The equalizer curve with all frequencies set to
0 cannot be adjusted.
Adjusting 9-band graphic equalizer
For CUSTOM1 and CUSTOM2 equalizer
curves, you can adjust the level of each band.
! A separate CUSTOM1 curve can be cre
ated for each source. (The built in CD
player and the multi CD player are set to
the same equalizer adjustment setting
automatically.) If you make adjustments
when a curve other than CUSTOM2 is se
lected, the equalizer curve settings will be
memorized in CUSTOM1.
! A CUSTOM2 curve can be created com
mon to all sources. If you make adjust
ments when the CUSTOM2 curve is
34
En
selected, the CUSTOM2 curve will be up
dated.
1
Recall the equalizer curve you want to
adjust.
See Recalling equalizer curves on the previous
page.
2
Press DSP to select 9-band graphic
equalizer.
Press DSP until 50Hz appears in the display.
# If 9 band graphic equalizer has been pre
viously adjusted, the frequency of that previously
selected will be displayed instead of 50Hz.
3
Press c or d to select the equalizer
band to adjust.
Each press of c or d selects equalizer bands
in the following order:
501002004008001.6 k3.15 k
6.3 k12.5 k (Hz)
4
Press a or b to adjust the level of the
equalizer band.
Each press of a or b increases or decreases
the level of the equalization band.
+6 6 is displayed as the level is increased
or decreased.
# You can then select another band and adjust
the level.
Using the position selector
One way to assure a more natural sound is to
clearly position the stereo image, putting you
right in the center of the sound field. The posi
tion selector adjusts the volume level of sound
from each speaker to match seat positions
and the number of people in the car and lets
you recall settings at the touch of a button.
Here is a list of the positions:
Hide quick links:
Advertisement
Table of Contents
