Adjusting Source Levels - Pioneer FH-P6200 Operation Manual

Audio Adjustments
1 Press AUDIO to select non fading out-
put setting.
Press AUDIO until NonFAD : 0 appears in the
display.
2 Press a or b to adjust the level of the
non fading output.
Each press of a or b increases or decreases
the level of the non fading. +6  24 is dis
played as the level is increased or
decreased.

Adjusting source levels

SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra
dical changes in volume when switching be
tween sources.
! Settings are based on the volume level of
the FM tuner, which remains unchanged.
1 Compare the FM tuner volume level
with the level of the source you wish to ad-
just.
2 Press AUDIO and hold until SLA ap-
pears in the display.
# When selecting the FM tuner as the source,
you cannot switch to SLA.
3 Press a or b to adjust the source vo-
lume.
Each press of a or b increases or decreases
the source volume.
SLA :+4  SLA :4 is displayed as the source
volume is increased or decreased.
Notes
! If you do not operate the SLA function within
about 30 seconds, the display is automatically
returned to the source display.
! Since the FM tuner volume is the control, it is
not possible to apply source level adjustments
to the FM tuner.
! The AM tuner volume level can also be ad
justed with source level adjustments.
! The built in CD player and the multi CD player
are set to the same source level adjustment
volume automatically.
! External unit 1 and external unit 2 are set to
the same source level adjustment volume
automatically.
Section
08
31
En