12.6 Disassembly and Replacement
[A] Developer unit
Note:
Make sure to perform "T.B.D" and take off the process unit before the developer material is
replaced.
(1)
Take off the Process unit.
P.11-9 "[A] Process unit"
(2)
Take off the drum cleaner unit from the pro-
cess unit so that only the developer unit will
be left.
P.11-10 "[B] Drum cleaner unit"
Notes:
1. Be careful not to touch or scratch the
drum surface at this time.
2. Do not deform the Guide Mylar by touch-
ing this.
e-STUDIO163/203 DEVELOPMENT SYSTEM
Drum cleaner unit
12 - 10
Developer unit
Fig. 12-6
Guide mylar
Fig. 12-7
December 2005 © TOSHIBA TEC