Door Switch; High Limit Thermostat - Vulcan-Hart SG SERIES Service Manual

SG SERIES GAS CONVECTION OVENS - REMOVAL AND REPLACEMENT OF PARTS
Fig. 34
5. Reverse procedure to install the replacement
window.

DOOR SWITCH

electrical power to the machine and
follow lockout / tagout procedures.
1. Remove the TOP FRONT COVER.
2. Disconnect the lead wires to the door switch.
3. Remove the switch.
F45525 (0814)
Disconnect the
Page 14 of 31
Fig. 35
4. Reverse procedure to install the replacement
switch and check for proper adjustment as
outlined under DOOR SWITCH ADJUSTMENT.

HIGH LIMIT THERMOSTAT

electrical power to the machine and
follow lockout / tagout procedures.
1. Take out racks from the oven.
2. Remove the high limit thermostat cover/mounting
plate from inside the oven cavity at the top.
Fig. 36
3. Disconnect lead wires from high limit thermostat
then remove high limit thermostat from cover/
mounting plate.
Disconnect the