Installing the battery
1.
Insert the battery into the slot on the computer.
2.
Tighten the screws to secure the battery to the computer.
3.
Connect the battery cable to the connector on the system board
4.
Install the
base
cover.
5.
Follow the procedure in
Power and volume control board
Removing the power and volume control board
1.
Follow the procedure in
2.
Remove the:
a.
base cover
b.
battery
3.
To remove the power and volume control board:
a. Peel the adhesive tape [1].
b. Disconnect the power and volume control board cable from the connector on the system board
[2].
After working inside your
Before working inside your
computer.
computer.
17