Installing The Input/Output (I/O) Board; Power Connector; Removing The Power Connector Port - Dell Latitude 3379 Owner's Manual

Installing the Input/Output (I/O) board

1. Place the I/O board into the slot on the computer.
2. Tighten the screws to secure the I/O board to the computer.
3. Connect the coin cell battery and power and volume button board cables to the connector on the
I/O board.
4. Connect the I/O board cable to the connector on the I/O board.
5. Affix the adhesive tape to secure the I/O board cable
6. Install the:
a. battery
b. base cover
7. Follow the procedure in

Power connector

Removing the power connector port

1. Follow the procedure in
2. Remove the:
a. base cover
b. battery
3. To remove the power connector port:
a. Disconnect the power connector port cable from the connector on the system board [1].
b. Remove the screw that secures the power connector port to the computer [2].
c. Lift the power connector port away from the computer [3].
After working inside your
Before working inside your
computer.
computer.
31