System Configuration Screen Options - Dell Latitude 3379 Owner's Manual

System Configuration screen options

Option Description
SATA Operation Allows you to configure the internal SATA hard-drive controller. The options are:
•
•
Drives Allows you to configure the SATA drives on board. All drives are enabled by default.
The options are:
•
•
SMART Reporting This field controls whether hard drive errors for integrated drives are reported
during system startup. This technology is part of the SMART (Self Monitoring
Analysis and Reporting Technology) specification. This option is disabled by default.
•
USB Configuration This field configures the integrated USB controller. If Boot Support is enabled, the
system is allowed to boot any type of USB Mass Storage Devices (HDD, memory
key, floppy).
If USB port is enabled, device attached to this port is enabled and available for OS.
If USB port is disabled, the OS cannot see any device attached to this port.
The options are:
•
•
USB PowerShare This field configures the USB PowerShare feature behavior. This option allows you
to charge external devices using the stored system battery power through the USB
PowerShare port.
Audio This field enables or disables the integrated audio controller. By default, the Enable
Audio option is selected. The options are:
•
•
Miscellaneous Allows you to enable or disable the following devices:
Devices
•
•
70
Disabled
AHCI:
This option is enabled by default.
SATA-0
SATA-1
Enable SMART Reporting
Enable USB Boot Support (by default enable)
Enable External USB Port (by default enable)
Enable Microphone (by default enable)
Enable Internal Speaker (by default enable)
Enable Camera (enabled by default)
Enable Secure Digital (SD) card (enabled by default)